Simrad EQ 55 Technical Information download pdf (Page 92)

950-70017001/Iss 1.2 EQ-55 Operators Manua

Page 4.14 Installation Instructions for the EQ-55

Kongsberg Simrad Mesotech Ltd.

Port Coquitlam, BC - Canada

Figure 4.2 Recommended location of the transducer on the hull

Figure 4.3 Transducer location on a bulbous bow

4.3.8 Thru-hull Installation

Typical thru-hull installations are illustrated for transducers on the following

pages. The leveling blocks shown are to be supplied by the installer. Any gaps

between the block and the transducer should be filled up with mastic and the

entire surface should be made as smooth as possible to provide an undisturbed

flow of water over the transducer face.

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 153 154

No comments

Simrad EQ 55 Technical Information Page 92