Simrad NSS7 Installation Manual Page 78
- Page / 96
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
76 |
The alarm system | NSS Operator Manual
The alarm system
The NSS system will continuously check for dangerous situations and system faults while
the system is running. When an alarm situation occurs, an alarm message will pop up on the
screen.
If you have enabled the siren, the alarm message will be followed by an audible alarm, and
the switch for external alarm will go active.
The alarm is recorded in the alarm listing so that you can see the details and take the
appropriate corrective action.
Type of messages
The messages are classifi ed according to how the reported situation will aff ect your vessel.
The following color codes are used:
Color Importance
Red Critical
Orange Important
Yellow Standard
Blue Warning
Green Light warning
Single alarms
A single alarm is displayed with the name of the alarm as the title, and with
details for the alarm.
Multiple alarms
If more than one alarm is activated simultaneously, the alarm message will
display a list of up to 3 alarms. The alarms are listed in the order they occur
with the alarm activated fi rst at the top. The remaining alarms are available
in the Alarms dialog.
Acknowledging a message
The following options are available in the alarm dialog for acknowledging a message:
Option Result
OK Sets the alarm state to acknowledged, meaning that you are aware of the alarm
condition. The siren / buzzer will stop and the alarm dialog will be removed.
The alarm will however remain active in the alarm listing until the reason for
the alarm has been removed.
Disable Disables the current alarm setting. The alarm will not show again unless you
turn it back on in the Alarms dialog.
There is no time-out on the alarm message or siren. These remain until you acknowledge it or
until the reason for the alarm is removed.
16
- Operator Manual 1
- Copyright 3
- Warranty 3
- Declarations and conformance 3
- About this manual 3
- The software 4
- Contents 5
- 87 Menu and dialog overview 8
- 90 Index 8
- Introduction 9
- The NSS screen 10
- Pages overview 12
- Settings 12
- Basic operation 13
- The menus 14
- Dialog boxes 14
- Placing the cursor 15
- Charts 16
- Placing waypoints 17
- Creating routes 17
- Dragging waypoints 17
- Measuring distance 17
- Chart overlay 18
- Using 3D charts 18
- Vessel mode 19
- Explore mode 19
- Navionics chart options 20
- The chart settings panel 21
- 3D boat selection 22
- Synchronize 2D/3D chart 22
- Waypoints 23
- T r acks 24
- Creating a new track 25
- Track settings 25
- Navigating with the NSS 26
- Arrival radius 27
- O course (XTE) limit 27
- Arrival alarm 27
- Loran settings 28
- Data elds 29
- The course line 29
- Vessel symbol 29
- O course limit 29
- Data elds 29
- Using the autopilot 30
- Power steering (NFU) 33
- Follow-up steering (FU) 33
- AUTO mode (auto compass) 33
- Zigzag-turns 35
- Square-turn 35
- Lazy S-turn 35
- NoDrift mode 37
- Sailing with the autopilot 38
- Tacking in Auto mode 39
- Tacking in Wind mode 39
- Wind steering and navigation 40
- Auto-hide 41
- Crescent lights 41
- Chart compass 41
- Locking an NSS unit 41
- Sea state lter 41
- Tack time 42
- Tack angle 42
- Wind function 42
- VMG optimizing 42
- Layline steering 42
- Automatic steering 43
- Installation 43
- Transmit 44
- Optimizing the radar image 45
- Positioning the radar center 45
- T rue motion 46
- Using the cursor 46
- Range rings 46
- EBL/VRM 46
- Radar options 47
- Heading up 48
- North up 48
- Course up 48
- MARPA targets 49
- Target trails and safe rings 50
- The vessels extension lines 50
- Defi ning 50
- Radar settings panel 51
- Auto range 52
- Preset range levels 52
- Custom range 52
- Bottom lock 53
- Auto gain 54
- Pausing the echosounder 55
- Echo options 56
- StructureScan™ overlay 57
- Overlay downscan 58
- DownScan 59
- SideScan 60
- Zooming 60
- Adjusting the color settings 61
- Pausing StructureScan™ 62
- Structure options 62
- The Instruments panels 63
- Using AIS 64
- Radar pages 65
- Chart pages 65
- Filtering the targets 66
- Speed and course indication 66
- AIS icon orientation 66
- Enabling audio 67
- The audio media bar 67
- Operating the audio source 68
- Audio playback 69
- Using the FM/AM radio 69
- Using Sirius radio 70
- The weather display 71
- Weather symbology 72
- Weather alarms 73
- Weather reports 73
- Using Video 74
- Mirroring the video image 75
- The video standard 75
- BEP CZone 76
- The CZone info panel 77
- The alarm system 78
- Autopilot section 79
- The Tools page 80
- W aypoin ts/routes/tracks 81
- T rip Log 81
- Sun/moon 81
- Customizing your system 83
- Changing system settings 84
- GPS source 86
- Speed, Course and Route 86
- Set start position 86
- Maintenance 87
- Backing up your system data 88
- Menu and dialog overview 89
- Insight chart database 90
- Navionics chart database 90
- Index 92
- *988-10102-002* 96
Related products and manuals for Navigators Simrad NSS7
Navigators Simrad AC42 Technical Information
(116 pages)
(116 pages)
Navigators Simrad AP26 User Manual
(148 pages)
Navigators Simrad MX525A Specifications
(34 pages)
(34 pages)
Navigators Simrad RS12 VHF User's Guide
(72 pages)
(72 pages)
Navigators Simrad MX525A User Manual
(2 pages)
(2 pages)
Navigators Simrad MX525A User Manual
(2 pages)
(2 pages)
Navigators Simrad MX525A Specifications
(34 pages)
(34 pages)
Navigators Simrad AP50 Specifications
(62 pages)
(62 pages)
© 2020, manymanuals.com. All rights reserved. | 1.244 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals