Simrad NX45 Specifications download pdf (Page 67)

Simrad NX40/45 Installation and Operation Manual 67

If the boat has twin engine, the red needle or number •

shows port data, green shows the starboard data.

The gauges can be set up to be analog (dial) or •

digital (number).

17-3-2 Tank level displays

The tank level display shows the levels from the optional

level sensors in one or two tanks per engine, containing

either fuel, oil, water or waste. Refer to the Navico

installation manual for further information.

Each tank must be setup and calibrated.•

An alarm can be set in addition to any SmartCraft •

engine fault low-level alarms.

Setting up tank calibration

From the SETUP menu, scroll down and select 1.

SmartCraft, press  or > to conrm.

From the2. SmartCraft menu, scroll down and

select Tanks, press

 or > to conrm.

Once you have selected Tanks, you can calibrate settings

to your requirements.

Setting up tank alarms

From the SETUP menu, scroll down and select 1.

SmartCraft, press  or > to conrm.

From the 2. SmartCraft menu, select Tanks and

then Tank alarm.

Using the arrow keys, turn On.3.

Note: You can adjust the tank alarm levels to your

requirements.

17-3-3 Troll control

Troll control allows adjustment of the engine’s idle speed

from the instrument. Troll control automatically controls

the engine idle speed to maintain engine RPM or boat

speed.

To use troll control:

Set the Troll window to • On idle or Always and set

Troll mode to Speed or RPM.

To use speed troll control:

Set speed type to • paddle

To prohibit troll control:

Set troll window to• Never

1 2 ... 62 63 64 65 66 67 68 69 70 71 72 ... 119 120

No comments

Simrad NX45 Specifications Page 67