Simrad GC80 Instruction Manual download pdf (Page 59)

INSTALLATION

20221511 / C 51

Setting the Speed input system

The latitude input system may be changed during the settling

process of the start-up procedure from item 7 onwards.

1 Press the DISP button until the display shows speed value

and speed input system.

2 Press SET button once, and the upper line in the display

starts flashing.

3 Use the arrow buttons for toggling between available

speed input systems:

Manual

GPS

LOG (pulse)

LOG (serial)

4 Select active speed input system, and confirm the selection

by pressing the

ACK/ENT button.

5 If Manual input system is selected, the display will change

to show flashing numerical values.

6 Use the arrow buttons for entering the speed value, and

confirm the input by the ACK/ENT button.

7 The display will return to shown speed value and speed

input system without flashing.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 111 112

No comments

Simrad GC80 Instruction Manual Page 59