Simrad GC80 Instruction Manual download pdf (Page 61)

INSTALLATION

20221511 / C 53

2 Press the DISP button once to display main category A-2.

3 Press the SET button to enter the sub-category 2.1.o.

4 Use the arrow buttons to increase or decrease the offset

parameter value.

Note! To correct for +1.5°, press the Arrow Up button until the

display shows 1.5°.

To correct for -1.5°, press the Arrow Down button until the

display shows 358.5°!

5 Confirm the new value by pressing the ACK/ENT button,

or reject the changes by pressing the SET button. The

display will return to sub-category 2.1.o.

6 Exit the Extension menu by pressing and holding the

SET

and

ACK/ENT buttons simultaneously for at least 3

seconds.

For further information about the Extension menu, refer Using

the Extension menu, page 56 onwards.

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 111 112

No comments

Simrad GC80 Instruction Manual Page 61