Simrad GC80 Instruction Manual Page 66
- Page / 112
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Simrad GC80/GC85 Compact Gyro Compass
58 20221511 / C
Main
Category
Sub
Category
Parameter/description
Default
value
Range
A-1 cont.
1.5.L (φ) Phi offset (°)
Offset value (°) around the vertical axis of gyro sphere
(rotor axis) and the sensitive element.
0.00 -3.00 – 3.00
1.6.t (θ) Theta offset (°)
Offset value (°) around the horizontal axis of gyro
sphere (rotor axis) and the sensitive element.
0.00 -3.00 – 3.00
1.7.G X signal pickup gain (v/°)
Distance of the sensitive element share and the rotor
axis direction. Inclination angle around horizontal axis
is obtained equivalently by monitoring this signal. For
example, when north side of the rotor axis rises, the
sensitive element follows to rise its north side, then
gyro sphere suspended by the suspension wire moves to
south side. X signal represents this amount of
movement (v/°).
This parameter is only used for GC85.
2.32 0.00 – 5.00
1.8.c Ks/H
Suspension wire twist torque. Fixed value.
1.477 1.000 – 2.000
1.9.r Maximum rate of turn (°/sec)
Maximum rate of turn in the turn rates which the
b
earing servo system followed up to this moment
(°/sec).
NOTE:
The maximum is measured after 3 hours from
system start.
NOTE:
Reset this data certainly after completion of
installation!
0.00 -
1.A.F Maximum deviation of bearing servo (°)
Maximum deviation value in the bearing servo loop that
occurred up to this moment (°).
NOTE:
The maximum is measured after 3 hours from
system start.
NOTE:
Reset this data certainly after completion of
installation!
0.00 -
1.b.S Maximum deviation of horizontal servo (°)
Maximum deviation value in the horizontal servo loop
that occurred up to this moment (°).
NOTE:
The maximum is measured after 3 hours from
system start.
NOTE:
Reset this data certainly after completion of
installation!
0.00 -
- SIMRAD GC80/85 1
- COMPACT 1
- Document revisions 2
- Document history 2
- About this manual 3
- Contents 5
- 20221511 / C vii 7
- 1 SYSTEM OVERVIEW 9
- 1.1 Introduction 10
- 1.2 Precaution in use 11
- 1.3 System components 12
- 1.4 Bearing repeaters 12
- 2 USER INTERFACE 13
- POWER Button 14
- Display 14
- GYRO Button 14
- EXT Button 14
- DISP Button 15
- SET Button 15
- ACK/ENT Button 15
- Arrow Buttons 15
- Alarm Indicator 15
- 8 20221511 / C 16
- 3 OPERATION 17
- Start-Up 18
- Turning the Gyro compass OFF 19
- 3.3 Adjusting dimming level 20
- 20221511 / C 22
- True bearing 23
- Latitude 23
- Speed error correction 24
- OPERATION 25
- 3.6 Pendulum function 26
- 3.7 Alarm messages 27
- Acknowledging an alarm 28
- 4 MAINTENANCE 29
- POWER button is turned 30
- Mechanical installation 31
- 20221511 / C 25 33
- 20221511 / C 27 35
- Parameter updates 36
- SET button, and then 37
- 4.8 Replacing the Fuses 38
- 20221511 / C 31 39
- Power Supply Unit (Option) 40
- 5 INSTALLATION 41
- 5.1 Unpacking and handling 42
- 5.2 Mechanical installation 42
- Control unit 43
- Power supply unit (Option) 45
- Master compass 46
- 5.3 Cabling 47
- 5.4 Grounding the units 48
- 5.5 Dip-switch settings 48
- Configuring the Control unit 49
- 20221511 / C 43 51
- 20221511 / C 45 53
- System Start-up 55
- Configuring the gyro system 56
- 20221511 / C 49 57
- ACK/ENT button 58
- ACK/ENT 58
- ACK/ENT button 59
- Adjusting True heading 60
- 20221511 / C 53 61
- 54 20221511 / C 62
- 6 ADVANCED SETTINGS 63
- 6.1 General 64
- 20221511 / C 57 65
- 58 20221511 / C 66
- ADVANCED SETTINGS 67
- 60 20221511 / C 68
- 62 20221511 / C 70
- 7 TECHNICAL SPECIFICATION 71
- 7.1 Accuracy 72
- 7.2 General specification 72
- 7.3 Input specification 73
- 7.4 Output specification 74
- 7.5 Physical Dimensions 75
- 7.6 Power 75
- GC80 Compact Control Unit 76
- GC80/85 Master Compass 76
- GC80 Compact Control unit 76
- 8 DRAWINGS 77
- 8.1 Drawings included 78
- DRAWINGS 79
- 72 20221511 / C 80
- 74 20221511 / C 82
- 76 20221511 / C 84
- 9 SPARE PART LIST 85
- 78 20221511 / C 86
- SPARE PART LIST 87
- 80 20221511 / C 88
- 10 TERMINAL LAYOUT 89
- 10.1 ITERM board 90
- TERMINAL LAYOUT 91
- 10.2 IOPT board 93
- 86 20221511 / C 94
- 11 DIP SWITCH SETTINGS 95
- 11.1 Compact control unit 96
- ICIF board 97
- 90 20221511 / C 98
- DIP SWITCH SETTINGS 99
- IOPT board 100
- 20221511 / C 93 101
- ITERM board 102
- ACTIONS 103
- 12.1 The alarm system 104
- 12.2 Acknowledging an alarm 105
- 12.3 Fault finding 106
- Inverter failure 107
- Zero cross failure 107
- System communication failure 108
- 20221511 / C 101 109
- Repeater failure 110
- 20221511 / C 103 111
- 104 20221511 / C 112
Related products and manuals for Navigational compasses Simrad GC80
(36 pages)© 2020, manymanuals.com. All rights reserved. | 1.418 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals