Simrad NX40/45 Installation and Operation Manual 105
20-6 Installation: GPS antenna
Installing an antenna
Install the SimNet compatible antenna via the AT40/45
SimNet converter or SimNet junctions. Refer to the
antenna installation manual
20-7 Installation: Echo transducer
Connect the transducer to the blue unit connector; tighten
the locking collar.
During setup
a) set •
Echosounder to
b) set up the echosounder options•
CAUTION
!
!
CAUTION
DANGER
WARNING
MOB will not work if the
unit does not have a GPS
x.
Echo cable
Blue
CAUTION
!
!
CAUTION
DANGER
WARNING
Do not install plastic
through hull transducers
in solid wooden hulls.
Leakage through the hull
may result.
Do not install bronze
transducers in metal hulls.
This will cause electrolytic
corrosion that may result
in damage to the hull or
transducer.
Note: An alternative GPS source can be connected via
NMEA0183. See 20-11 and 20-12 Installation: Other
NMEA0183 instruments and AIS receiver.
Red
Black
Main switch
Fuse 5A
12 V DC
GPS Antenna
AT 40/45
Comments to this Manuals