Simrad NX45 Specifications Page 107

  • Download
  • Add to my manuals
  • Print
  • Page
    / 120
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 106
Simrad NX40/45 Installation and Operation Manual 107
Radar cable
RADAR
20-10 Installation: Radar
Install the Simrad radar as described in the Installation
Manual supplied with the radar.
Carefully read the important safety and warning
information and also the location and wiring guidelines
BEFORE installing the radar.
20-11 Installation: Other NMEA 0183
instruments
NMEA is an industry standard for interconnecting
instruments. The unit can:
Receive and display wind speed and direction from
an optional compatible wind instrument.
Receive and display depth, paddlewheel boat speed
and water temperature from an optional compatible
instrument.
Receive data from an optional compatible GPS
source.
Send GPS position and other navigation data to an
autopilot or other instrument. An autopilot requires
APB, APA and VTG sentences.
During setup to send NMEA data to other instruments, set
NMEA out to and specify the NMEA data to send.
20-12 Installation: AIS Receiver
An optional Simrad AIS receiver may be connected to
the unit. The receiver must be connected to the Fuel/Nav
port on the unit, Pin 3 (White) +NMEA in, Pin 1 (Black/
Shield) to ground (not -NMEA).
Note:
The power source used by the AIS receiver should
have a common ground to the AT40 SimNet
converter
Page view 106
1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 119 120

Comments to this Manuals

No comments