Simrad NX45 Specifications Page 9

  • Download
  • Add to my manuals
  • Print
  • Page
    / 120
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 8
Simrad NX40/45 Installation and Operation Manual 9
1-4 Removing and replacing the display unit
If the NX40/45 is bracket mounted then it can easily be
removed for security.
Removing the display unit
Turn the NX40/45 off and put the cover on.
Loosen the knobs on the mounting bracket and lift
the unit off the bracket.
Unplug the connectors from the NX40/45; turn each
locking collar anti-clockwise until you can pull the
plug out.
Store the NX40/45 in a dry clean place.
Replacing the display unit
Plug the connectors into the back of the display
unit:
Match the connector’s color to the socket color.
Insert each connector and turn the locking collar
clockwise until it is nger tight.
Nothing will be damaged if a cable is plugged into
the wrong socket by mistake.
Hold the NX40/45 in place on the mounting bracket.
Tilt it for best viewing, then hand tighten the knobs
on the mounting bracket. Remove the cover.
Mounting bracket
Knob
Page view 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 119 120

Comments to this Manuals

No comments