Simrad NX45 Specifications download pdf (Page 76)

Simrad NX40/45 Installation and Operation Manual76

Select • VRM/EBL then 1 (VRM/EBL 1) or 2 (VRM/EBL

2).

Set Enable to •

to show the VRM and EBL on the

radar window (or to hide them).

Select EBL reference if you want to change the EBL •

bearing reference. There are two choices:

i °R shows the EBL bearing relative to your boat’s •

head.

ii °M/°T shows the EBL bearing relative to magnetic •

North or true North.

Select •

Adjust to change the positions of the VRM

and the EBL so that you can align them with the

target. Use:

i •

left and right to decrease and increase the

radius of the VRM until it touches the target to

measure the range.

ii •

up and down to move the EBL until it touches

the target to measure the bearing.

The range and bearing of the target is shown at the •

bottom of the screen.

To clear the VRM/EBL display, press ESC and repeat •

steps 1 and 2. Then set Enable to

If you want to hide (or change the settings for) the •

range rings, North line, and/or heading line, press

> Radar.

If you want to nd the range and bearing of another

target, repeat the sequence using the other VRM/EBL.

This is shown in a different pattern.

18-9-2 Finding range and bearing with a

oating VRM/EBL

If you move the center of a VRM away from your boat it

is called a oating VRM. Use this to measure the range

and bearing between two locations on the radar window,

such as a headland and a buoy.

From the radar window, press MENU then select •

VRM/EBL.

Select VRM/EBL then 1 (VRM/EBL 1) or 2 (VRM/EBL •

1).

Set Enable to •

to show the VRM and EBL on the

radar window (or to hide them).

Select EBL reference if you want to change the EBL •

bearing reference. There are two choices:

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 119 120

Comments to this Manuals

No comments

Simrad NX45 Specifications Page 76

Comments to this Manuals

Related products and manuals for Car navigation systems Simrad NX45