Simrad NX45 Specifications download pdf (Page 33)

Simrad NX40/45 Installation and Operation Manual 33

Creating a new route from the routes window

> Create

To change the route name

Select the route name >

To insert a waypoint in the route

Select where the waypoint will be:•

•

To insert the rst waypoint in a new route >

Leg 1.

•

To insert a waypoint at the end of the route, select

the unused leg at the end of the list of waypoints,

otherwise, select the waypoint to insert the new

waypoint in front of.

•

A list of waypoints is shown. Select the waypoint

to use. The distance and bearing of each leg is shown

automatically.

•

to scroll through waypoints.

To remove a waypoint from the route

Move the cursor to the waypoint >

> Remove

Display the route on the chart and check that the route

does not cross land or dangerous water.

7-2-3 Editing a route

Editing a route from the chart

In the Routes window, select the route to edit >

> Edit on chart > Edit the route.

Editing a route from the routes window

Select the route to edit >

> Edit > Edit the

route.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 119 120

No comments

Simrad NX45 Specifications Page 33