Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications Page 110
- Page / 122
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
IS15 General Manual
108 20220760L
Condition Probable Cause Action
One or more
instrument(s) always
show ‘----’, with the
pointer of analog
instruments at their
zero positions.
No data is reaching
the affected
instrument(s).
Check the signal wiring to the affected
instrument(s).
Check Roblink data by entering the
Roblink test menu on a Combi instrument.
See the following fault finding charts for
details.
Wind Display Faults
Condition Probable Cause Action
There are no Wind
Speed or Wind
Angle displays, or
these displays
always show ‘----’.
The wind transducer is
not fitted to the mast
head connector.
The wind transducer is
not connected to the
IS15 Transceiver
properly.
Check, and fit the transducer if necessary.
Check the wind transducer’s Roblink
connection to the Transceiver.
Check that the wind transducer cable is not
damaged.
Check the connections in the Junction Box
at the mast foot.
Contact your dealer.
The Wind Speed
displays always
show ‘0.0’, but the
Wind Angle displays
are shown.
The anemometer
(cups) is seized.
Check the anemometer cups and have the
wind transducer serviced if necessary.
A broken anemometer cup may be
replaced by the dealer/customer.
The Wind Speed is
too low, when it was
previously correct.
Worn anemometer
cups/bearing.
Damaged anemometer
rotor or transducer
body.
Check the anemometer cups and rotor
bearings or have the wind transducer
serviced if necessary.
Check that the rotor (cups) and transducer
are not damaged.
Make other checks as for ‘always showing
0.0’ above.
The Wind Speed is
too high or erratic,
when it was
previously correct.
Damaged wiring
causing intermittent
contact.
Make checks as for ‘always showing 0.0’
above.
- Instruments 1
- General Manual 1
- 20220760L 1 3
- Document revisions 4
- Document history 4
- Contents 5
- 1 INTRODUCTION 7
- 1.2 Equipment supplied 8
- 20220760L 7 9
- 20220760L 10
- 2.1 General Description 11
- 2.2 Powering Up 11
- 2.3 Display backlighting 11
- 2.4 Display Screens 12
- Notes ! 13
- Increase 14
- Decrease 14
- To Reset the Trim Speed 17
- 2.6 Screen Group 2: Wind 19
- 2.7 Screen Group 3: VMG 21
- 2.10 Alarm Sounding 29
- 3.1 General Description 31
- 3.2 Powering Up 31
- 3.3 Display backlighting 31
- 3.4 Display Screens 32
- 3.5 Screen Group 1: Depth 35
- 3.6 Screen Group 2: Speed 37
- 3.7 Screen Group 3: Wind 39
- 3.8 Screen Group 4: Nav 1 41
- 3.9 Screen Group 5: Nav 2 42
- 3.10 Screen Group 6: Race 44
- 3.11 Screen Group 7: Log 45
- 3.12 Alarm Sounding 46
- 4.1 General Description 47
- 4.2 Powering Up 48
- 4.3 Display backlighting 48
- 4.4 The Heading Display 48
- The Locked Course Display 49
- 4.5 Alarm Sounding 50
- 5 TECHNICAL SPECIFICATIONS 51
- 20220760L 51 53
- 5.2 IS15 Compass 54
- 5.3 IS15 Transceiver 54
- 5.4 IS15 Expander 55
- 20220760L 55 57
- Technical Specifications 59
- 20220760K 60
- 20220760K 59 61
- 6 INSTALLATION 63
- 6.3 System layout 65
- SDT-2 System 66
- 6.5 Transducers 67
- 6.6 Cabling 68
- Extending Cables 69
- Securing the Cables 69
- Securing the connectors 70
- 6.8 NMEA connections 71
- Installation 73
- 6.9 IS15 Transceiver 75
- 74 20220760L 76
- Power connection 77
- 76 20220760L 78
- 20220760L 77 79
- 12V supply 80
- 6.11 IS15 Expander 81
- Choosing the Cable Routes 82
- NMEA connections 84
- Figure 6-27 NMEA out 85
- Figure 6-28 NMEA in 85
- Setting-Up 89
- Expanding the system 89
- Figure 6-34 Expanded system 90
- 7 SETTING-UP 91
- (Automatic) 92
- (Manual) 92
- Bearing 92
- 7.3 General Screen Group 94
- 7.4 Depth Screen Group 96
- 7.5 Boat Speed Screen Group 97
- 7.7 Wind Screen Group 99
- 7.8 Navigation Screen Group 100
- 7.9 Compass Screen Group 100
- Screen 1 101
- Screen 2 101
- Screen 3 101
- 7.11 Expander Screen Group 102
- 7.10 Rudder Screen Group 102
- First time turn on 103
- Screen 4 106
- Screen 5 106
- Screen 6 106
- Screen 7 106
- Screen 8 107
- Screen 9 107
- Screen 10 107
- 8 FAULT FINDING 109
- IS15 General Manual 110
- 108 20220760L 110
- (MHU) needs new calibration 111
- 110 20220760L 112
- 20220760L 111 113
- 112 20220760L 114
- 20220760L 113 115
- ROBLINK TEST 116
- Fault Finding 117
- 9 MAINTENANCE 119
- 9.4 Return for Service 120
- 9.5 Local Master Reset 120
- 10 SPARE PARTS LIST 121
Related products and manuals for Navigational compasses Simrad SH90 - PRODUCT DESCRIPTION REV A
(6 pages)© 2020, manymanuals.com. All rights reserved. | 1.206 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals