Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications download pdf (Page 120)

IS15 General Manual

118 20220760L

9.4 Return for Service

Please ensure that an instrument that is believed to be faulty is

correctly installed, the cabling is in good condition and correct,

that all connections are secure, and that a correct supply is

present at the Roblink/power connector.

Should the unit have to be returned to your dealer, adequate

packing must be used. Please ensure that your name, telephone

number, return address, a clear fault description, and if possible a

copy of the proof of purchase are included with any returned

equipment. Simrad and their representatives are not responsible

for any equipment lost in transit.

Please quote the instrument’s serial number in all

correspondence. This is found on the back of the instrument.

9.5 Local Master Reset

When an instrument is leaving the factory a Master Reset has

been made. However, if an instrument is being used in a

different system or setup, you can perform a local Master Reset

on the instrument in that system before you disconnect it

and

move it to a system where you want to put it.

Refer to screen 4 on page 93 or screen 6 on page 104.

1. Turn off the Roblink as per instructions

2. Perform a Master Reset as per instructions

3. Turn on the Roblink as per instructions

You can now install the instrument in another system without

having to make a system wide Master Reset and loose the

existing calibration and settings in that system.

1 2 ... 115 116 117 118 119 120 121 122

No comments

Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications Page 120