Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications download pdf (Page 38)

IS15 General Manual

36 20220760L

Screen 2

TRIM SPEED

• The upper screen section always displays ‘TRIM’, a sign ‘+’

or ‘–‘ showing increasing or decreasing speed, and the trim

speed unit, e.g. ‘KTS’.

• The lower screen section displays the trim speed reading.

The Trim Speed is the difference in speed between the present

boat speed and the target speed. At turn on the Trim Speed will

only be displayed if it has been reset (see below), until that time

it will show ‘---’.

To Reset the Trim Speed

The Trim Speed may be reset at any time, as below:

• Select the Trim Speed display screen.

• Apply a quick press on the

(Reset) button. This will set

the current speed as the target speed. The Trim Speed display

will then show changes from the current speed.

The following screens 3-6 have no sub-screens.

Screen 3

VELOCITY MADE GOOD TO WIND

• The upper screen section displays ‘VMG WIND’ and the

VMG to wind unit, e.g. ‘KTS’.

• The lower screen displays the VMG to wind reading. The

reading is positive sailing upwind and negative sailing

downwind.

Screen 4

SPEED OVER GROUND

• The upper screen section displays ‘SOG’ and a Speed Over

Ground unit, e.g. ‘KTS’.

• The lower screen displays the Speed Over Ground reading.

The SOG will only be displayed if a GPS receiver input is

available.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 121 122

No comments

Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications Page 38