Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications download pdf (Page 91)

Setting-Up

20220760L 89

7 SETTING-UP

7.1 First time turn on

Note ! Always turn on all NMEA “listeners” and “talkers” connected

to the system before the first time you turn on the IS15 system.

This includes turn on after a COMMUNICATION RESET or a

MASTER RESET. The system will then automatically configure

the IS15 NMEA ports as talkers (NMEA out) or listeners (NMEA

in).

Before leaving the factory a Master Reset has been performed on

all instruments. The first time power is applied to an instrument,

the display will prompt you to press the illumination key.

IS15 Combi IS15 Multi

To assign an instrument to a system, press the

button. In a

multiple instrument system the instruments are assigned and

given an Id number in the same sequence as the

buttons are

pressed. The instrument that is assigned as #1 will be the master

unit and broadcast common set-up information on the Roblink to

the other instruments.

Notes !

1. When assigning more than one instrument to a system, allow

an interval between each assignment, while the instruments

read “Please Wait”.

2. With an Expander in the system this will always have Id no.

1, i.e the first instrument to be assigned will then be Id no. 2.

After having assigned all instruments in the system, turn the

power Off and then On (the instruments will display POWER

OFF [P.OFF] if you forget). The system will now display the

start-up screens.

IS15 Combi IS15 Multi

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 121 122

No comments

Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications Page 91