Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications Page 95

  • Download
  • Add to my manuals
  • Print
  • Page
    / 122
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 94
Setting-Up
20220760L 93
Screen 3
SHOP MODE
The instrument has a demonstration mode that can be activated
by selecting ‘Shop Mode’ On. This function is very useful for
dealers when they want to demonstrate the IS15 system or when
it is put on display on a show. The Shop Mode is turned off
when power is turned off.
Note ! When in Shop Mode the instruments will display external data if
data is available as input from sensors.
Screen 4
NMEA IN/OUT
This screen allows you to manually change the NMEA ‘listener’
port = NMEA IN to a ‘talker’ port = NMEA OUT, or vice versa.
Hence you need not make a Master reset or a Communication
reset. Refer to chapter 7.1 First time turn on. See also note
below.
The setting is local to each instrument.
Note ! If there is an active ‘talker’ connected to the NMEA port, you
will not be able to change this port from ‘IN’ to an ‘OUT’ port
unless the ‘talker’ is disconnected.
Screen 5
ROBLINK ON/OFF
This screen allows you to turn the Roblink Off (or On). The
setting is local on each instrument.
Notes !
1. The Roblink must be turned Off when the instrument is used
as a single NMEA repeater. However, if more heads are
connected as NMEA repeaters in a daisy chain the Roblink
must be On.
2. When the Roblink has been turned Off it will not default to
ON even after a Master Reset. If required it must therefore be
turned On again using the procedure above.
Page view 94
1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 121 122

Comments to this Manuals

No comments