Operation of IS15 Multi
20220760L 35
Deep Alarm limit
Refer to Figure 3-2 to set the Deep Alarm limit.
Screen 5
ANCHOR ALARM STATUS
• The upper screen section displays ‘ANCH ALRM’.
• The lower screen section displays the Anchor Alarm status;
‘ON’ or ‘OFF’.
Screen 5 has a sub screen for setting the anchor alarm ‘ON’ or
‘OFF’.
Anchor Alarm On/Off
Refer to Figure 3-2, page 32 to turn the Anchor Alarm ON or
OFF.
Note ! The anchor alarm should be off when the boat is not at anchor.
The alarm will sound when during a 40 seconds time period
there is a change in the depth of 2-3 meters (6-10 ft.).
3.6 Screen Group 2: Speed
There are six screens in this group:
Screen 1
BOAT SPEED
• The upper screen section always displays ‘BOAT’ and a
speed unit, e.g. ‘KTS’ (knots).
• The lower screen section displays the boat speed reading.
Screen 1 has a sub screen for setting the water speed damping.
Water speed damping
The displayed water speed has four damping levels (0-3). On
power up damping level 0 is always selected.
To change the water speed damping level follow the procedure
in Figure 3-2 and select the wanted damping level. The higher
the figure the more damping.
Comments to this Manuals