Simrad AP50 Installation Manual Page 70
- Page / 134
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
Software Set-up Procedure
20222469 / B 61
Set-up item Equipment connected Connected to terminal Assignment
INSTR Instrument system
Instrument system
Voyage Data Recorder
J50, Main PCB
1 Hz*
5 Hz
VDR
RADAR Radar
Radar
Future option
J50, Power PCB, TB9
Simrad*
Furuno
Special **
* Default setting
** For future use.
Table 3-3 Interface Set-up - Output Signal Port 1
Sea Trial
Caution ! The Sea Trial must always be performed in open waters at a
safe distance from other traffic.
A sea-trial can only be performed if the Dockside Settings are
completed and confirmed. It is also important that the Interface
Set-up be performed prior to adjusting sea trial settings.
The following sea trial settings must be set:
• Compass calibration (to automatically compensate for
onboard magnetic deviation)
• Compass Offset (to offset the final compass heading readout)
• Max/Minimum thrust, thrust direction and levels (only if
thruster is selected)
• Set cruising speed (in the AP50)
• Set rudder zero (to indicate the precise midships position of
the rudder)
• Set rate of turn at cruising speed (to select your preferred turn
rate). It is essential that this setting is carried out.
If the boat steers satisfactorily, there is no need to perform the
Manual or Automatic tuning.
The following sea trial settings may be used as optional settings:
• Manual tuning (Steering parameters: Rudder, Counter
Rudder)
• Automatic tuning (an optional method of determining the
steering parameters)
• Speed response (to tell how the rudder gain shall be adjusted
automatically by vessel speed)
- Installation manual 1
- SIMRAD AP50 2
- About this document 3
- Installation Manual 4
- Contents 5
- 20222469 / B v 6
- 20222469 / B vii 8
- 1 GENERAL INFORMATION 10
- 1.2 How to Use This Manual 11
- 2 INSTALLATION 12
- 2.5 AP50 System Layout 14
- JUNCTION UNIT 16
- Max 600mm (23,5") 17
- Electrical Connection 18
- Mechanical Alignment 20
- Mechanical mounting 21
- Electrical installation 21
- 20222469 / B 13 22
- RF14XU ELECTRONIC MODULE 23
- 20222469 / B 15 24
- 2.9 J50 Junction Unit 25
- 20222469 / B 17 26
- Junction Unit Terminals 27
- System Select 27
- Toggling) 28
- 2.10 Drive Unit Installation 29
- Connecting a Reversible Pump 31
- 2.11 Control Unit 34
- HOW TO REMOVE PINS: 36
- Insert tool in slot 36
- Pull the wire 36
- Extraction tool 36
- FRONT VIEW 37
- JP21 Jack Point Installation 38
- 2.12 RC25 Rate Compass 39
- CONTROL 40
- RFC35 Fluxgate Compass 41
- 2.13 FU50 Steering Lever 42
- 2.14 TI51 Thruster Interface 42
- 2.15 AD50 Analog Drive 42
- 2.16 S9 Steering Lever 42
- Connection 43
- 20222469 / B 35 44
- POWER PCB 49
- Analog Heading Repeater 50
- Digital Heading Repeater 50
- GI51 Gyro Interface 50
- 20222469 / B 43 52
- CDI35 Interface 53
- 3 SOFTWARE SET-UP PROCEDURE 54
- 3.2 Installation Menu 55
- Language selection 56
- Dockside 56
- 48 20222469 / B 57
- 20222469 / B 49 58
- P S 59
- 20222469 / B 53 62
- Interface Set-up 63
- 20222469 / B 55 64
- 20222469 / B 57 66
- 58 20222469 / B 67
- Software Set-up Procedure 68
- 60 20222469 / B 69
- Sea Trial 70
- +000° 71
- 20222469 / B 63 72
- +005° 76
- 20222469 / B 69 78
- 20222469 / B 71 80
- 3.3 Final Test 81
- 3.4 Providing User Training 82
- 4 ADVANCED SETTINGS 84
- NMEA Data 85
- Master Reset 86
- 4.2 Settings Menu 87
- 20222469 / B 79 88
- Bypass/clutch: 89
- Handshake 1: 89
- 20222469 / B 81 90
- 20222469 / B 83 92
- 20222469 / B 85 94
- Thruster 95
- 20222469 / B 87 96
- SETTINGS 98
- 5 SPARE PARTS LIST 100
- 20222469 / B 101
- 20222469 / B 93 102
- 6 TECHNICAL SPECIFICATIONS 104
- 6.2 AP50 Control Unit 105
- 6.3 AP51 Remote Control 106
- 6.4 Junction Units 107
- 6.5 RC25 Rate Compass 108
- 6.7 CD100A Course Detector 110
- 6.8 CD109 Course Detector 110
- 20222469 / B 103 112
- 6.12 NI300X NMEA Interface 114
- 6.13 TI51 Thruster Interface 115
- 6.14 AD50 Analog Drive 115
- SIMRAD R3000X 116
- STBY AUTO 116
- 6.16 S9 Steering Lever 117
- 6.18 NMEA Sentences 118
- Remarks: 119
- 7 INDEX 120
- 20222469 / B 113 122
- Simrad AP50 Autopilot 123
- 114 20222469 / B 123
- Work Turn Gain, 85 123
- 8 APPROVALS 124
- 8.2 Certificates 125
- Simrad doc.no.519103/F 126
- Simrad doc.no.519107F 128
© 2020, manymanuals.com. All rights reserved. | 0.107 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Comments to this Manuals