Simrad AP50 Installation Manual download pdf (Page 74)

Software Set-up Procedure

20222469 / B 65

Direction and Maximum Thrust STBD, Analog

Thruster

SEATRIAL

Thruster zero 00%

Maximum thrust STBD ---%

Maximum thrust PORT ---%

Minimum thrust 00%

Yes

SEATRIAL

Maximum thrust STBD

P S

Adjust?

P S

Adjust?

SEATRIAL

Maximum thrust STBD

(ONLY IF CONTINUOUS THRUSTER OR DANFOSS

THRUSTER IS SELECTED)

Rotate the course knob clockwise to activate the Maximum

thrust STBD setting.

Rotate the course knob to starboard and verify that the boat turns

to starboard. Adjust the bargraph until maximum thrust is

obtained. The thruster will run for 10 seconds after last

adjustment has been carried out.

If the boat turns to port when the course knob is turned to

starboard, rotate the knob to port to ensure a starboard turn.

Adjust the bargraph until maximum thrust is obtained.

This tells the autopilot which direction to turn the thruster.

Proceed to the Maximum thrust PORT item by pressing the

(STBD) button.

Direction and Maximum Thrust PORT, Analog

Thruster

(ONLY IF CONTINUOUS THRUSTER OR DANFOSS

THRUSTER IS SELECTED)

Rotate the course knob clockwise to activate the Maximum

thrust PORT setting. Adjust the baragraph until you get

maximum thrust in port direction.

This tells the autopilot which direction to turn the thruster.

Proceed to the Minimum thrust item by pressing the

(STBD) button.

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 133 134

No comments

Simrad AP50 Installation Manual Page 74