Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications download pdf (Page 96)

IS15 General Manual

94 20220760L

Screen 6

ROBLINK TEST

Test screen on IS15 Combi only.

This screen is used for trouble shooting. Refer to Chapter 8.

Screen 7

COMMUNICATION RESET

Allows you to reset the system communication (Roblink) in the

event anomalies are observed on one or more instruments. This

reset will not default the calibration or unit settings.

Press the

button and hold for 2 seconds. The display shows

‘POWER OFF’.

Turn the system off and refer to section 7.1. to assign the

instrument(s) to the system.

Screen 8

MASTER RESET

When a MASTER RESET is performed on one of the

instruments in a system it becomes system wide and all

instruments are reset to default values.

Note ! Do not perform a Master Reset unintentionally, because

you will default settings and calibration values.

Press the

button and hold for 2 seconds. The display shows

‘POWER OFF’.

Turn the system off and refer to section 7.1. to assign the

instrument(s) to the system.

Note ! After the Master Reset a new set-up has to be performed.

7.4 Depth Screen Group

Screen 1

DEPTH UNIT

One of the following depth units may be selected:

• IS15 Combi: Feet (FEET), Metres (MTRS), Fathoms (FATH).

• IS15 Multi: Feet (FT), Metres (M), Fathoms (FA).

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 121 122

No comments

Simrad SH90 - PRODUCT DESCRIPTION REV A Specifications Page 96